Single-Colored

HI-POLY 810 Series  (Single-Colored)

HI-POLY 810, 810R, 810T (Self-leveling flooring with varying textures)

HI-POLY 810 is a popular and versatile flooring system meeting most flooring requirements. It can be integrated with other flooring types to form a composition flooring with enhanced properties.

  • Typical thickness: 1 - 6 mm

  • Self-leveling

  • Optional textures: smooth, grainy or orange peel.

  • Monolithic self-leveling layer composition

  • High compressive strength

  • High tensile and flexural strength

  • Chemical resistant

810R

Datasheet

Color Chart

810T small.png

810T (orange peel )

HI-POLY 810CP (Textured  Car Park flooring)

HI-POLY 810CP is our most popular car park flooring system.  It has the outstanding properties of 810 plus the special uniform and durable textured surface for slip resistance and to prevent the squeal of tires. Designed to last for years with minimal maintenance.

  • Typical thickness : 1 - 6 mm

  • Special textured, slip resistant surface

  • Reduce the squeal of tires

  • Water, oil and chemical resistant

  • Low maintenance

  • Wear resistant

Datasheet 

Color Chart

810CP small.png
HI-POLY 810CR (Extra Chemical Resistant Flooring)

Self-leveling system specially formulated to withstand some of the most aggressive chemicals and solvents used in chemical and processing industries.​

  • Typical thickness : 1 - 6 mm

  • Excellent acid and alkaline resistance

  • Excellent solvent resistance

  • Outstanding mechanical strengths

  • Monolithic layer composition

Datasheet 

Color Chart

810CR small.png
HI-POLY 810T-ESD (Anti-Static Self-leveling)

An anti-static self-leveling epoxy flooring tested to international standards (ANSI/ESD S7.1-2005). The combination of conductive aggregates and 100% solids epoxy provides outstanding physical & permanent anti-static features.

  • Typical thickness : 1 - 6 mm

  • Permanent anti-static

  • Chemical resistance 

  • High compressive, tensile and flexural strength

  • Meets BS flammability test

Datasheet 

Color Chart

HI-POLY 810LM (High-built Solvent Free Epoxy Line Marking Coating)

HI-POLY 810LM is an economical, solvent free, high-built epoxy coating suitable for line marking applications on all HI-POLY epoxy flooring systems, concrete and cement sand screed substrate. It is a two-component epoxy coating, with near-zero V.O.C., tested to international standards(BS, EN and ASTM). ​

  • Typical thickness : 0.2 - 0.6 mm

  • Durable and economical 

  • Easy maintenance 

  • Solvent free

  • Near-zero VOC

Datasheet 

Color Chart

HI-POLY 830 Series  (Single-Colored)

HI-POLY 830 (Heavy Duty Industrial Flooring)

Use of specially blended and graded aluminum oxide/hard aggregates and epoxy binder enables this flooring system to withstand high abrasion and impact, heavy rolling encountered in vehicular traffics and industry.

  • Typical thickness: 4-10 mm

  • Installation method: hand trowel

  • Aggregates: graded aluminum oxide/hard aggregates

  • Multi-colored option with black specks

  • For high impact, heavy rolling and abrasion use

Datasheet 

Color Chart

HI-POLY 830RP (Skid-resistant Vehicular Ramp and Traffic Flooring – Applied by trowel)

Use of specially blended and graded aluminum oxide/quartz hard aggregates and epoxy binder enables this high traction flooring system to withstand high abrasion and impact encountered in vehicular ramp and high traffic flooring.

  • Typical thickness: 4-10 mm

  • Installation method: hand trowel

  • Aggregates: graded aluminum oxide/hard aggregates

  • Impact resistant

  • Wear resistant

  • Good traction

Datasheet 

Color Chart

Datasheet 

Color Chart

HI-POLY 830SR-BC (Skid-resistant Vehicular Ramp and Traffic Flooring – Applied by broadcasting)

Use of super hard aluminum oxide aggregates (Moh's Hardness>=9) evenly broadcasted onto high strength epoxy binder enables this surfacing system to withstand high abrasion and to provide skid resistance in vehicular traffics where high traction is needed.

  • Typical thickness: 3-7 mm

  • Installation method: broadcast

  • Aggregates: super hard aluminum oxide

 (Moh's Hardness>=9)

  • High friction

  • Skid resistant 

  • High traction

HI-POLY 830SP (Skid-resistant Vehicular Ramp and Traffic Flooring – Applied by trowel)

Use of angular shaped “salt and pepper” colored calcined bauxite and high strength epoxy binder enables this surfacing system to provide extreme traction and skid resistance in heavy vehicular ramp traffics.

  • Typical thickness: 4-10 mm

  • Installation method: hand trowel

  • Aggregates: angular shaped “salt and pepper” colored calcined bauxite

  • Heavy duty

  • Skid resistant

  • Extreme traction

Datasheet 

Color Chart

HI-POLY 830NTC (Fine Textured Skid-resistant Flooring– Applied by broadcasting)

Use of fine aluminum oxide evenly broadcasted onto high strength epoxy binder enables this fine textured surfacing system to provide skid resistance and withstand high abrasion in vehicular traffics.

  • Typical thickness: 2-4 mm

  • Installation method: broadcast

  • Aggregates: fine aluminum oxide

  • Heavy duty

  • Skid resistant

Datasheet 

Color Chart

HI-POLY 890 Series  (Single-Colored)

HI-POLY 890 (High-built Solvent Free Epoxy Coating)

HI-POLY 890 is an economical, solvent free, high-built epoxy coating suitable for most commercial and industrial flooring applications.

  • Typical thickness: 0.5 - 0.8 mm

  • Solvent free

  • High-built

  • Dust proof

  • Durable and economical

  • Seamless

  • Easy maintenance

 

 

Datasheet 

Color Chart

HI-POLY 7 Series  (Single-Colored)

Color Chart

HI-POLY 7R/7S DIY (Do-It-Yourself) Epoxy Coating

A solvent free, two-component epoxy coating system combining outstanding physical and chemical properties with ease of application. Built-in textured surface (7R) provides slip resistance ideal for flat or slightly uneven floor.

  • Typical thickness 0.4-0.7mm (in 2 coats)

  • DIY system

  • Solvent free

  • Brush or roller applied

  • Excellent bonding with concrete, brick, wood or metal

  • Available in slip resistant (7R) or smooth (7S) surface

Datasheet 

 
 
 
 

8 Wang Lee Street
Yuen Long Industrial Estate

Yuen Long, N.T., Hong Kong

T + (852) 2391 0371
F + (852) 2397 6226

 香港新界,元朗工業邨,宏利街 8 號 

Copyright © 2014, Chematco Ltd.  All rights reserved.