RUBERSTEIN® Wall-panels are 50 cm x 70 cm each, 3 mm thick flexible elements. A stenciled glass fleece is colored and then covered with a mixture of mineral and synthetic material in a clinker-brick patern. Areas of glass fleece left uncovered from the ¡§relief printing¡¨ resemble the ¡§joints of the brickwork¡¨. The finished panel weighs about 900 gm, or 2.5 kg/m2, produced in red, white, beige, rustic, yellow, and dark brown.

Brick size: following DF in accordance to ISO 105

The low weight and mode of attachment of RUBERSTEIN® Wall-panels do not effect the statics nor stability of a building. They effectively protect facades endangered by beating rain, renovate cracked or eroding plaster walls and peeling paint.

Millions of RUBERSTEIN® Wall-panels have proven themselves worthwhile on nearly every type of wall surface. They are simply fastened to the existing background (wall) and then a final waterproofing is applied as needed. Each panel is vertically and horizontally joined together with seams.

Weatherproof RUBERSTEIN® Wall-panels and adhesive guarantee the respiration the building elements need. Therefore, there is no need for rear ventilation which is required by common facade panels. Finished RUBERSTEIN® Wall-panels are highly resistant to fire according to ISO 4102; made from specially prepared components; highly resistant to atmosphere influence - similar to a reinforcing plaster. Natural tensions and movements between components are reduced to a minimum.

Information Data Sheet Technical Spec